Advertisement
5. Some lithium batteries (Sony, JVC, Panasonic, etc...) come with "security charging terminal"
marked with letter "C", DO NOT contact these terminals with spring contactors during charging to
avoid irrevocable damage. (Fig. 6.1)
Note: To void damaging batteries with "security charging terminal", DO NOT connect the
charger with the adapter before (Lithium) battery polarities are detected and Ready
LED (9) is lit.
VI. Charging Indication
1. When lithium-ion battery connectors are detected and secured, the Yellow "Ready" LED will be
lit; push (6) forward and press the (8) cover holder to affix the battery.
2. When connect AC/DC power adapter to power input socket (7), the Green "Charge" LED (10)
will be lit. The Charger is powered and ready to charge. When the Yellow "Ready" and Red
"Charge" LED turn on, the installed battery is charging.
(7)
3. When the Yellow "Ready" LED turns off and the Red "Charge" LED (10) turns into Green, the
battery is about 95% charged; it will then start trickle-charging for additional 30 minutes to reach
maximum charged.
VII. USB Port Charging
All hand-held devices with tip connectors via USB DC 5V can be
charged by this Charger. Connect the device to USB output port (11)
and plug the AC adapter to AC power outlet. The charging status will be
indicated on the screen of device.
Fig. 6.1
(9)
(10)
3
(9)
Advertisement
