One-Touch Setup - Sony SGP521 User Manual

To receive items using Bluetooth
1
Make sure that the Bluetooth
devices.
The sending device now starts sending data to your device.
2
If prompted, enter the same passcode on both devices, or confirm the
3
suggested passcode.
When you are notified of an incoming file to your device, drag the status bar
4
downwards and tap the notification to accept the file transfer.
Tap Accept to start the file transfer.
5
To view the progress of the transfer, drag the status bar downwards.
6
To open a received item, drag the status bar downwards and tap the relevant
7
notification.
To view files you have received using Bluetooth®
From your Home screen, tap
1
Find and tap Settings > Bluetooth.
2
Press and select Show received files.
3

One-touch Setup

You can use the One-touch setup function to automatically launch the setup of several
features that work wirelessly between two Xperia™ devices. For example, if you have
an Xperia™ phone and an Xperia™ tablet, you can use One-touch setup to launch the
configuration of basic settings for Screen mirroring and Xperia Link™. Once you've
completed the setup, then you only need one touch every time to launch these
features. For example, with just one touch you can launch Screen mirroring and view
the screen of your phone on the tablet, or you can launch Xperia Link™ and
automatically share your phone's mobile network with the tablet. The One-touch setup
function is activated using NFC. Other one-touch features include Bluetooth® and
Media Server. For more information about the setup of Screen mirroring, Media
Server, NFC and Bluetooth®, refer to the relevant sections of the User guide.
To start One-touch setup on your device
From your Home screen, tap
1
Find and tap Settings > Xperia™ Connectivity > One-touch setup. The NFC
2
function is automatically turned on.
Make sure the NFC function on the other Xperia™ device is turned on.
3
Make sure the screens of both devices are unlocked and active.
4
Hold the two devices together so that the NFC detection area of each device
5
touches the other. The one-touch setup function launches automatically.
Both devices must support the One-touch setup function.
The front part of your device that corresponds to the NFC detection area (located at the back
of your device) is also NFC enabled. So you can also touch this part of your device to other
devices during NFC transactions.
This is an Internet version of this publication. © Print only for private use.
®
®
function is on and is visible to other Bluetooth
.
.
98
®