Nfc - Sony SGP521 User Manual

To set up a connection with a DUALSHOCK™3 wireless controller
Make sure the Bluetooth® function on your device is turned on.
1
Connect a USB On-The-Go (OTG) adaptor to your device.
2
Connect the DUALSHOCK™3 wireless controller to the OTG adaptor using a
3
USB cable
When Controller connected(wired) appears in the status bar at the top of your
4
device screen, unplug the USB cable.
When Controller connected(wireless) appears in the status bar, a wireless
5
connection is established.

NFC

Use Near Field Communications (NFC) to share data with other devices, such as a
video, photo, web page address, music file or contact. You can also use NFC to scan
tags that give you more information about a product or service as well as tags that
activate certain functions on your device.
NFC is a wireless technology with a maximum range of one centimetre, so the devices
sharing data must be held close to each other. Before you can use NFC, you must first
turn on the NFC function, and the screen of your device must be active.
NFC may not be available in all countries and/or regions.
To turn on the NFC function
From your Home screen, tap
1
Find and tap Settings > More....
2
Mark the NFC checkbox.
3
To share a contact with another device using NFC
Make sure that both devices have the NFC function turned on, and that both
1
screens are active.
To view contacts, go to your Home screen, tap
2
Tap the contact that you want to share.
3
Hold your device and the receiving device back to back so that the NFC
4
detection areas of each device touch each other. When the devices connect, a
thumbnail of the contact appears.
Tap the thumbnail to start the transfer.
5
When the transfer is done, the contact information is displayed on the screen of
6
the receiving device and is also saved on the receiving device.
The front part of your device that corresponds to the NFC detection area (at the back) is also
NFC enabled. So you can also touch this part of your device to other devices during NFC
transactions.
To share a music file with another device using NFC
Make sure that both your device and the receiving device have the NFC
1
function turned on, and that both screens are active.
To open the "WALKMAN™" application, tap
2
Select a music category and browse to the track you want to share.
3
Tap the track to play it. You can then tap
4
works whether the track is playing or paused.
Hold your device and the receiving device back to back so that the NFC
5
detection areas of each device touch each other. When the devices connect, a
thumbnail of the track appears.
Tap the thumbnail to start the transfer.
6
When the transfer is done, the music file plays immediately on the receiving
7
device. At the same time, the file is saved on the receiving device.
The front part of your device that corresponds to the NFC detection area (at the back) is also
NFC enabled. So you can also touch this part of your device to other devices during NFC
transactions.
This is an Internet version of this publication. © Print only for private use.
.
, then tap .
, then find and tap
to pause the track. The transfer
94
.