Honeywell Q682 User Manual page 17

Troubleshooting (Continued)
Problem
No cooling.
1
Check
— System switch may be in OFF
or HEAT position.
— Fuse or circuit breaker.
— Condenser switch position.
Located outdoors and may
be turned off.
— Thermostat connections.
Check for correct terminal
hookups. Repair any frayed
or broken wires. Firmly
tighten all terminal screws.
— Other.
Action
Move switch to COOL position.
If fuse is blown or breaker tripped,
replace or reset. If fuse blows again,
call the heating and air conditioning
dealer.
Move to ON position.
Turn off power to cooling system.
Contact a qualified service technician
for assistance.
17
(continued)
69-0643—1