To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever G) and remove the battery pack
@.
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step
Notes on the battery pack and the AC Adaptor
• When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure
11:11
that the
(Movie) lamp/O (Photo) lamp (p. 15)/ACCESS lamps (p. 13)/access lamp(p. 44) are turned
off.
• Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
• In the default setting, the power turns off automatically if you leave your camcorder without any
operation for approximately 5 minutes, to save battery power ([A.SHUT OFF]).
theb~ttery
Charging
You can charge the hatterypack.inany countries/regionsusing the ACAdaptor supplied
withyourqimcorder withinthe,A.CIOq V 24Q\4 SOHzl60 HZ
ane1edrQnicvQltagetrallsforrt1~r,
• Do not use
us
14
Charging the battery pack:'
1:
pack abroad
range.
.