Getting Started; Step 1: Charging The Battery Pack - Sony HDR-XR1 00 Operating Manual

Getting started

Step Charging the battery pack
1:
2
Battery pack
,y====~::<Jl""'-'
You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your
camcorder.
• You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder.
1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Be sure that the A mark on the DC plug is facing the right.
The charge lamp lights up and charging starts. The charge lamp turns off when the
battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
• See page 58 on charging, recording and playing time.
• When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
1
===:=!.=== .... To the wall outlet (wall socket)
Charge lamp
ACCESS lamp
(hard disk)
I
.....
VI
~
.... .....
rtl
c..
us
13