2-8. CONTROL SWITCH BLOCK (FK-4750), SPEAKER (2.0 CM)
!¡ Screw (M2)
8 Slant the block in the
direction of the arrow A ,
then remove the block
in the direction of the
arrow B .
Be careful that the flexible
must not be caught.
@∞ Cabinet (G) assembly
!¶ Claw
D
@¢ Peel off the
area shown
by shading.
@§ Control switch block (FK-4750)
B
A
6 Peel off the area
shown by shading.
!£ Screw
(M1.7
2.5)
@º Jack fixed plate
C
!™ Three screws
(M1.7
!¢ Two screws
(M1.7
2.5)
@£ Two tapping
screws
(M1.7
5)
@™ Tapping
screw
(M1.7
4)
2 SP retainer plate
1 Two screws
(M1.7
lock ace, p2
3 Screw
(M1.7
2.5),
lock ace, p2
4 Screw
(M1.7
2.5),
lock ace, p2
7 Screw
(M1.7
2.5),
lock ace, p2
5 Three spacer (C)
@¡ Open the HP jack cover.
!• Remove the cabinet (G) assembly from the
cabinet (L) block assembly in the arrow direction.
Be careful not to damage the control switch
block's (FK-4750) flexible.
2.5)
D
2-9
2.5),
9 Remove the
two solderings
Control switch block
(FK-4750)
!º Speaker (2.0 CM)
!∞ Two screws
(M1.7
2.5)
!§ Tapping screw
(M1.7
5)
C
!ª Remove the control switch block
that is attached to the cabinet (R),
from the cabinet (R).
Be careful that the flexible
must not be caught.