Main Procedure - Optoma EP773 Serivce Manual

3-2 Main Procedure

No Symptom
1 No Power
2 Auto Shut
Down
3 No Image
Confi dential
- Ensure the Power Cord and AC Power Outlet are securely
connected
- Check Lamp Cover and Interrupt Switch
- Ensure all connectors are securely connected and aren't
broken
- Check Lamp Driver
- Check LVPS
- Check Main Board
- Check LED Status
a. Lamp LED Light
- Check Lamp
- Check Lamp Driver
- Check Main Board
b. Temp LED Light
- Check Thermal Sensor
- Check Thermal Switch
- Check Fan
c. Color Wheel
- Check Color Wheel
- Check Photo Sensor
- Ensure the Signal Cable and Source work
(If you connect multiple sources at the same time, use the
"Source" button on the control panel to swtich)
- Ensure all connectors are securely connected and aren't
broken
- Check Main Board
- Check DMD Board
- Check Color Wheel
- Check DMD Chip
- Check Engine Module
Procedure
3-2
EP773