No
Step
10
HDMI
finished
11
Check
the whole
process
Note: Please make sure the EDID of DVI and HDMI has burned in.
Procedure
- When the EDID programn
is completed, the
message "OK" will appear
on the screen.
1. In the "Read Item"
Selections, choose the
Port that you use.
Ex: If you use the Analog
(Digital) Port, choose
"Analog(Digital)" in the
"Read Item".
(Note: After clicking "Read" ,
if the code in the Serial Blank
is scrambled, please make a
check in "Trans".)
2. Click on "Read" to read
EDID information.
3. The "EDID Informations"
will show the result.
4. Click "Reset" to do the
next unit or "Exit" to close
the EDID program.
3
6-5
Photo
2.
4
1
HD72