Usb Driver Upgrade Procedure - Optoma HD72 Serivce Manual

USB Driver Upgrade Procedure

No Step
1 Set-up
2 Execute
Program
3 Type any
key to
continue
Procedure
1. Enter firmware mode.
(Refer to first page to
enter firmware mode)
2. Once Power, Lamp,
Temp LED lights up,
plug in USB Cable
into the Projector &
PC
Execute the C:\Program
files\DLP Composer\us-
bupdata.cmd
(Note: The "DLP Com-
poser" program must be
closed first.)
Press any key to contin-
ue. Then, wait for about
1 minute.
Photo
5-4 HD72