Step 5 Mount Thermostat Wallplate - Honeywell CT3400 Instructions Manual

For operating or making changes, use this guide.
Temporarily Change temperature for current period only —
shows on display, and cancels itself at next scheduled change. To cancel sooner, you may
press .
Run
Program
Hold a temperature indefinitely (such as on vacation)—
on display; to cancel, press
Check current temperature setting—
Cancel a program—Press and hold
Morning cannot be cancelled (only changed).
Permanently Change a program—Repeat steps under Heating Program (page 13) or Cooling
Program (page 14), as applicable.
Return to normal program or start program—
a
Press on to move number back; press on
STEP 5 Mount Thermostat Wallplate
Position wallplate on wall. Level the wall-
plate for appearance only. Use a pencil to
mark the two mounting holes that best fit the
application.
.
Run
Program
Current
.
Setting
Daytime Evening
,
Run
Program
15
16
a
Temp
; TEMPORARY indicator
,
Hold
Temp
Night
or three seconds to cancel.
.
to move number ahead.
WIRES THROUGH
WALL OPENING
WALL
ANCHORS
(2)
WALLPLATE
1
USE THE TWO MOUNTING HOLES THAT BEST FIT APPLICATION.
INSTALLATION
a
Hold appears
Temp
69-0733—3
WALL
MOUNTING
1
HOLES (3)
MOUNTING
SCREWS (2)
69-0733—3
M5932A