Hawking HMPS1U User Manual page 52

Storage Access Mode
1. Server Mode: In this mode, you can access the USB storage via FTP or
SMB/CIFS protocols. FAT16/32 file format is fully supported in this mode. For
NTFS, however, only the "read" operation is supported. This is the default mode.
2. NetUSB Mode: In this mode, you can access the USB storage using NetUSB
technology. FAT16/32 and NTFS file formats are supported, but only one user is
allowed to access the storage at the same time. Please refer to Chapter 9 for the
details about NetUSB technology.
mode
Server
NetUSB
User Accounts: You can change administrator name and password or add a user account
for SMB/CIFS Print/File server and FTP File server. If you forgot your administrator name
and password, you must perform Restore Factory Default action by plugging in the power
adaptor while pressing the Init button. Please refer to the chapter "Restore Factory
Defaults". Administrator owns the Read/Write Permission for File servers.
FAT16/32 NTFS
Writable Read Only
Writable Writable
Concurrency
Multi-user
Single User
52