Operation - Honeywell CT2800 Installation And Programming Instructions

d. Set the System switch to Cool, and the Fan switch to Auto.
e. Press Temp
room temperature (Fig. 26). Your cooling system and fan
should start.
NOTE: When cooling setting is changed, thermostat
can delay up to five minutes before turning on
air conditioner. This delay protects the compres-
sor.
f. Press Temp
temperature.Your cooling system and fan should stop.
g. Set the System switch to Off and the Fan switch to Auto.
The cooling system and fan should be off.

OPERATION

Change Clock for Daylight/Standard Time
a. Press once. The time is displayed.
Clock/Day
b. Press and hold Time
Run
c. Press once. The current time and day and current temperature display.
Program
69-1638—1
until the setting is 10°F (6°C) below
until setting is 10°F (6°C) above room
until the correct time is displayed.
Fig. 26.
18