Step 4. Program Thermostat - Honeywell CT2095 Owner's Manual

Step 4. Program Thermostat

After the batteries are installed, the thermostat
can be easily programmed in your hand before
it is installed on the wall.
If you prefer to program the thermostat after it is
installed on the wall, go to Step 7 and return
later to this programming section.
The Personal Programming Chart, Tables 2 and
3, may be helpful for planning your program
schedule of time and temperature settings for
various times of the day.
Four time periods are available during
weekdays — WAKE, LEAVE, RETURN, and
SLEEP; view these periods individually on the
display as you press the Weekday key.
• WAKE is the time period you want the house
at a comfortable temperature when you get
up and while you get ready for work or
school. (This is a higher temperature during
heating season and a lower temperature dur-
ing cooling season.)
• LEAVE is the time period you can set for an
energy-saving temperature while you are
away at work or school. (This is a lower tem-
perature during heating season and a higher
temperature during cooling season.)
• RETURN is the time period you want the
house at a comfortable temperature for activ-
ities before bedtime. (This is a higher tem-
perature during heating season and a lower
temperature during cooling season.)
• SLEEP is the time period you can set for an
energy-saving temperature while you are
sleeping. (This is a lower temperature during
the heating season and a higher tem-
perature during the cooling season.)
11 69-1385