Note: You can also change the leading hotkey via hotkey using <CTRL> →
<CTRL> → <New Hotkey> → <Enter> outside the OSD mode. Please
refer section 6.2 Leading Hotkey Select.
7.3.6. Sound
ON: Buzzer sound enabled.
OFF: Buzzer sound disabled.
Note: You can also enable/disable buzzer sound via hotkey using
<Scroll Lock> → <Scroll Lock> → <B> → <Enter> outside the OSD
mode. Please refer section 6.5 Buzzer sound Disable / Enable.
7.3.7. Language
English (En) / Deutsch (De) / Francais (Fr), 3 languages are available.
7.4. Auto-Scan in OSD: <F2>
7.4.1. Start to Auto-scan in OSD
Press <F2> from the OSD main menu. The auto-scan banner will be
shown to indicate the scanning channel.
Note: You can also start auto-scan function via hotkey using
<Scroll Lock> → <Scroll Lock> → <S> → <Enter> outside the OSD
mode. Please refer section 6.6.1 Start Auto-Scan Function.
7.4.2. Stop Auto-scan
Press any key on keyboard to STOP the auto-scan function. The
auto-scan banner will disappear when the scan stops.
Channel Name
Channel Number
Indicates Scan Mode
Figure 22: Auto-Scan Banner
25