Sata Configuration; Hot Plug; Parallel Port - Gigabyte GA-Z87M-D3H User Manual

` SATA Configuration

& SATA Controller(s) (Intel
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection (Intel
Enables or disables RAID for the SATA controllers integrated in the Intel Chipset or configures the SATA
controllers to AHCI mode.
IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
` Serial ATA Port 0/1/2/3/4/5
& Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
` Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port and

parallel port.

& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
j Only for GA-Z87M-D3H.
k Only for GA-H87M-D3H.
BIOS Setup
Z87j/H87k Chipset)
®
Z87j/H87k Chipset)
®
- 52 -