Clear Cmos Jumper - Gigabyte GA-Z87M-D3H User Manual

15) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configurations and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
Open: Normal
Short: Clear CMOS Values
- 29 - Hardware Installation