Download Print this page

Oki VB100VK Instruction Manual

Vga extender

Download this manual

VGA Extender

Model: VB100VK

Features:

• The VGA Extender allows VGA video signals to be transmitted up to 500ft / 135m via 4-pairs CAT5

shielded twisted pairs cable.

• Included as a pair.

• 1 x VGA connector to RJ45 female.

• Up to 500ft / 135m via standard 4 pairs CAT 5 STP cable instead of VGA cable.

• Supports up to 1280x1024 pixels at 200ft / 60m.

• Passive device; Not supported by VGA DDC protocol.

• Perfect for classrooms, lecture halls, tradeshows, video information displays...etc.

• Used in pairs, the VGA Extender is used in the home or for commercial applications as a smart,

fast and cost-effective process. It eliminates costly and bulky VGA cabling, allowing VGA monitors

to be connected at a distance from the PC via standard shielded twisted pair cable.

Wiring Diagram:

Front View

Cabling Systems & Solutions

Rev092007

Rear View

Max. Distance via CAT 5 STP

640x480 pixels (15MHz)

800x600 pixels (30MHz)

1024x768 pixels (60MHz)

1280x1024 pixels (100MHz) 200ft / 60m

UTP = Unshielded Twisted Pair

500ft / 135m

350ft / 105m

250ft / 75m

VGE01

Page 1: Wiring Diagram
VGA Extender Model: VB100VK Features: • The VGA Extender allows VGA video signals to be transmitted up to 500ft / 135m via 4-pairs CAT5 shielded twisted pairs cable. • Included as a pair. • 1 x VGA connector to RJ45 female.
Page 2 Specification: Model Number VB100VK Environment VGA. VESA VP&D 1.0, VIP ver 2.0 Devices VGA monitors, LCD projection screen, Laptops, PCs. Video : 1.1V P-P Input Signals Horiz & Vert Sync : TTL standard. 300kHz max. bandwidth Insertion Loss Less than 3dB per pair over the frequency range...
Page 3 2. screw off of the D-SUB , then connect the ground cable 3. Screw back the D-SUB, then plug RJ45 connector. Installation: 1. To have the best picture and quick installation, please use STP cable. There is no need to adjust Dip switch when using STP (shielding twisted pair) cable.
Page 4 Troubleshooting at picture problem: 1. Picture disappear intermittence or no picture display: Please adjust the DIP switch setting or change the vertical SYNC frequency of the VGA display card, DVR. 2. Display not syncing up properly: There are some certain models or brands of monitors with very high demand at sync-sensitive and the DIP switch setting may not compensate properly.