Table of Contents
Advertisement
Nokia Mobile Phones Customer Care E&A
Technical Services, Repair Concepts
If you assemble the SIM Connector, be aware that
the Twin Rip is also fitted correctly. The Twin Rip is
responsible to keep the SIM Connector in the right
position.
The Vibra Motor with its rubber case is squeezed into
the B-Cover like the Microphone. Do not grab the
spring connectors, because they may be damaged
when pulling the microphone. To change the
Microphone, push it up carefully with tweezers.
If you need to change the SIM Spring you first have
to release the two lockings.
Service Manual 5210 Level 1
PAGE 10 (19)
Confidential
When the SIM Connector is removed, t
Connector can be taken away.
With the Battery Connector Extractor Tool SRT-3
used in 8210 you can easily push out the Battery
Connector without bending the sensible contacts.
For changing the plastic Release Springs the lower
sides have to be unlocked first.
Copyright 2002 © Nokia Corporation
Approved 1.0
SQX –00380-en MWy
13.02.2002
he DC + HF
Advertisement
Table of Contents
