Compaq Presario 1200XL series Maintenance & Service Manual page 50

17. Remove four screws from the rear connector.
Note: Ensure that the PCMCIA eject button and microphone insertion is not sticking out
through the slot in the chassis.
18. Lift the system board up gently, prying the right side of the chassis to remove it.
To replace the system board, reverse these procedures.
Important: Before replacing the system board, remove all remaining cables.
50 R S
EMOVAL EQUENCE
Presario 1200XL Series
Model XL300, XL300A, and XL300B
P
RESARIO
N M S
OTEBOOK AINTENANCE AND
G 1200XL S
ERVICE UIDE ERIES