Top Cover; Mg166Cx-Usb/Mg166Cx Disassembly Procedures - Yamaha MG 166CX-USB Service Manual

MG166CX-USB/MG166CX
I MG166CX-USB/MG166CX DISASSEMBLY PROCEDURES
1. Top Cover (Time required: 12 min.)
1-1 Remove the twelve (12) fader knobs marked [490], three
(3) fader knobs marked [500] and fader knob marked
[510] and knob select marked [300]. (Fig. 1)
1-2 Remove the fifteen (15) screws marked [400], sixteen
(16) screws marked [410], four (4) screws marked [420],
six (6) screws marked [430], thirty-nine (39) hexagonal
nuts and thirty-nine (39) washers. (Fig. 1)
1-3 The top cover can then be removed. (Fig. 1)
* When installing the top cover on the bottom case
assembly, tighten the screws in the order shown in
Fig. 1. (Fig. 1)
M9 Hexagon nut and washer
[400]:
[410]:
[420]:
[430]:
[490]:
[500]:
[510]:
[540]:
[400]
[420]
[400]
Bind Head Tapping Screw-B 3x8 MFZN2B3 (WE774400)
Bind Head Tapping Screw-B 3x8 MFZN2B3 (WE774400)
Bind Head Screw 3x6 MFZN2B3 (WE878300)
Bind Head Tapping Screw-B 3x8 MFZN2B3 (WE774400)
Fader Knob Black/L-Gray (V9664900)
Fader Knob Red/D-Gray (V9665000)
Fader Knob White/Red (V9665100)
Knob Black (WD233000)
MG166CX-USB/MG166CX/MG166C-USB/MG166C
[430]
[410]
[490] [500]
(Fig. 1)

Top cover

[400]
[410]
[400]
Top cover
[400] Screw tighten (3rd)
[420]
[540]
[400] Screw tighten (1st)
[400]
[400] Screw tighten (2nd)
[400]
[510]
19