Manual Driving; Base Function; Turbo Function - Philips HomeRun FC9910 User Manual

6.3.2 Checking or removing a set cleaning time
Press the TIMER button on the remote
1
control. The set time becomes visible on the
display.
To remove the set cleaning time, press the
2
TIMER button again to make the set time
disappear from the display and press the
ENTER button to confirm.
Note:
D
To leave the timer function without removing
the set cleaning time, press the ENTER button.
6.4 Manual driving
Press the direction selector on the remote
1
control to direct your homeRun to a
particular area.
2
1 3
•
if you press the direction selector when
the robot is on but not cleaning, the
robot moves in the desired direction
without cleaning.
•
if you press the direction selector when
the robot is cleaning, the robot moves in
the desired direction while cleaning.
Note:
D
The down arrow does not work because your
homeRun cannot move backwards.
20
2
1 3

6.5 BASE function

Press the BASE button on the remote control
1
to make the homeRun return to its base
station. The text 'bASE' appears on the display.
The robot moves to the base station and
docks itself (see chapter 'Preparing for use').

6.6 TURBO function

Press the TURBO button on the remote
1
control to make your homeRun clean more
thoroughly (1). The TURBO indication lights
up on the display (2).
Press the TURBO button again to return to
2
the robot's normal level of thoroughness.
1 2