Sony TRINITRON KV-20FS12 Service Manual page 9

TV and Cable Box
Cable Box
Coaxial
Cable
1
From
cable
Coaxial
2
Cable
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF jack on the TV.
To view channels from your cable box, tune your TV to channel 3 or 4 (as set
on the rear panel of your cable box) and use the cable box's remote control to
change channels.
If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 19).
Connecting Your TV
Rear of TV
5
Operating Instructions
TV, VCR, and Cable box
3
VCR
2
Cable box
Coaxial
4 (Optional connection)
Cable
1
From
cable
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the IN jack on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 19).
(Optional connection)
4
If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
You can use the button to switch between the VHF/UHF and VIDEO
inputs.
6
Rear of TV