Operation Mode - LG LS-M3021CL Service Manual

I Name and Function-Remote Control
Remote Control
Signal transmitter
Transmits the signals
to the room air conditioner.
5
6
4
2
7
ON OFF
11
8
13
15

Operation Mode

Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
Signal transmitter
1
3
10
CANCEL
9
SET
12
14
16
Flip-up door
(opened)
)
START/STOP BUTTON
1
Operation starts when this button is pressed and
stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
2
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
3
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL
5
Used to start or stop the speed
cooling. (Speed cooling operates
super high fan speed in cooling mode.)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and set the
desired up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping opera-
tion. (See page 13)
TIME SETTING BUTTONS
8
Used to adjust the time.
TIMER SET/CANCEL BUTTON
9
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
10
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
11
Used to circulate the room air without cooling or
heating.
ROOM TEMPERATURE CHECKING BUTTON
12
Used to check the room temperature.
PLASMA(OPTIONAL)
13
Used to start or stop the plasma-purification func-
tion.
HORIZONTAL AIRFLOW DIRECTION CONTROL
14
BUTTON
(NOT ON ALL MODELS)
Used to set the desired horizontal airflow direction.
RESET BUTTON
15
Used prior to resetting time or after replacing batter-
ies.
2nd F Button
16
Used prior to using modes printed in blue at the
bottom of buttons.
- 40 -