Download Print this page

Pack Contents; About The Hard Drive - Verbatim PowerBay User Manual

Removable hard drive system usb / esata
Hide thumbs Also See for PowerBay:

Advertisement

Introduction
Thank you for purchasing this Verbatim PowerBay Removable Hard Drive System. Before you begin to use the drive there are a few important
things to learn about your new product.

Pack Contents

• PowerBay single bay hard drive
• Front Panel Lock Key (2 each)
• AC Power Adapter with power cord
• USB 2.0 Cable
• eSATA Cables (one 30cm cable and one 100cm cable)
• CD-ROM containing software
• User Guide
• Foot pads (4 each)
Controls, Connectors and Indicators
First familiarize yourself with the features of the unit.
1. Hard Disk Cartridge. The hard disk cartridge is designed to be easily removed from the enclosure for storage or replacement. To remove
the cartridge, slide the lock button to the right and then slide the cartridge out of the enclosure.
2. Cartridge Slide Lock and LED. After inserting the cartridge into the enclosure, slide the lock button to the left to lock the cartridge in
place. The lock button also shows the activity LED. The LED will come on blue to indicate the power-on state. The LED will fl ash purple
during data access.
3. Key Lock. Use the included key to lock the cartridge in the enclosure in order to safeguard from unauthorized removal.
4. Kensington Slot. Use this slot with a compatible Kensington lock.
5. Auto Power Switch. This product supports an Auto Power feature that allows the drive to power on and power off automatically
depending on the power condition of the attached host computer. To enable the Auto Power feature, move this switch to the "Auto"
position. To disable the Auto Power feature, move this switch to the "ON" position.
6. eSATA Connector. Use this connector to attach the drive to your computer via eSATA.
7. USB Connector. Use this connector to attach the drive to your computer via USB.
8. DC Input Connector. Use this connector to attach the DC plug of your included AC Power Adapter (10).
9. Power Switch. Once the AC Power Adapter (10) has been properly connected to the drive and an AC outlet, you can press the Power
Switch to the ON position to power on the drive.

About the Hard Drive

The hard drive comes pre-formatted in FAT32 format. This format allows for operation with either Windows or Mac OS.
Note: Capacity dependent on model. 1 MB = 1,000,000 bytes/1 GB = 1,000,000,000 bytes/1 TB = 1,000,000,000,000 bytes. Some capacity used for pre-loaded software, formatting
and other functions, and thus is not available for data storage. As a result, and due to differing calculation methods, your operating systems may report as fewer megabytes/gigabytes/
terabytes.
2

Advertisement

loading