Table of Contents
Advertisement
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Main body (used figure is KD-AR390)
3.1.1 Removing the FRONT CHASSIS assembly (See Fig.1)
(1) Disengage the four hooks a engaged the both side of the
FRONT CHASSIS assembly.
3.1.2 Removing the HEAT SINK (See Fig.2, 3)
(1) Remove the three screws A and the two screws B attaching
the HEAT SINK. (See Fig.2)
(2) Remove the two screws C and the one screw D attaching
the HEAT SINK. (See Fig.3)
3.1.3 Removing the BOTTOM COVER (See Fig.4)
(1) Remove the one screw E attaching the BOTTOM COVER.
(2) Slide the BOTTOM COVER to backward.
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
SECTION 3
DISASSEMBLY
a
hook
Fig.1
A
B
Fig.2
D
C
Fig.3
E
Fig.4
(No.MA376<Rev.002>)1-7
Advertisement
Table of Contents
