Setting The Fax Receive Stamp; Printing A Fax From The Memory; Out Of Paper Reception - Brother MFC-L8600CDW User Manual

Chapter 4
Setting the Fax Receive
Stamp
You can set the machine to print the received
date and time at the top centre of each
received fax page.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Fax Rx Stamp.
h
Press Fax Rx Stamp.
i
Press On or Off.
j
Press .
NOTE
• Make sure you have set the current date
and time on the machine (see
Basic User's Guide).
• If you downloaded Internet Fax:
The received time and date will not appear
when using Internet Fax.
36
Printing a fax from the
memory
4
If you choose Fax Storage, you can still
print a fax from the memory when you are at
your machine (see Fax Storage on page 30).
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Press a or b to display Print
Document.
f
Press Print Document.
g
Press OK.
h
Press .

Out of Paper Reception

As soon as the paper tray becomes empty
during fax reception, the Touchscreen
displays No Paper. Load paper in the paper
tray (see Basic User's Guide).
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, load fresh paper in the tray.
.
4
4