Brother QL-500 User Manual page 21

6
After restarting the computer,
connect your printer to the
computer by using the USB cable,
and then turn on the printer.
•
Before connecting the USB interface
cable, remove the caution label
affixed to the USB port of the
machine.
•
If you are connecting the printer to
Macintosh
printer directly to the USB port on Macintosh
7
For Mac OS ®
Double click the drive where Mac OS
[Applications] - [Utilities] - [Printer Setup Utility].
®
For Mac OS
Click in order of [Apple menu] - [System Preferences], and click [Print & Fax].
8
For Mac OS ®
Click [Add] and choose USB at the top of the screen.
Choose "QL-XXX" from the list and click [Add] again to add the printer to the
"Printer List".
®
For Mac OS
Choose "QL-XXX" from the list and click [Add] /
List" / "Print & Fax".
9
When the screen returns to [Printer List / Print & Fax] screen, check that
"QL-XXX" is added, and close the [Printer List / Print & Fax] screen.
Now you can use the machine.
For details on software, see the P-touch Editor Help.
®
via a USB hub, it may not be detected correctly. If so, connect the
X 10.3.9 - 10.4.x
X 10.5.x-10.6
X 10.3.9 - 10.4.x
X 10.5.x - 10.6
USB port
USB cable
®
.
®
X is installed, and click in order of
to add the printer to the "Printer
21
Power port
Power cord