Accessories - Gigaset SL78h User Manual

Accessories

Completing a firmware update
¤
Connect your phone to your PC using a
¢
USB data cable (
¤
Start the "Gigaset QuickSync" program
on the PC.
¤
Set up the connection to the handset.
¤
Open the [Device] tab via
¢
[Settings] [Device properties]
¤
Click on [Firmware update]
The firmware update starts.
The update procedure can take up to
10 minutes (excluding download time).
Do not interrupt the procedure.
Do not remove the USB data cable.
Data is first loaded from the update server
via the Internet. The time required for this
depends on the speed of your Internet con-
nection.
Your telephone display is switched off, and
the messages key f and the speaker key
d flash.
Once the update is complete, your tele-
phone automatically restarts.
Procedure in the event of an error
If the update procedure fails or your phone
does not work properly following the
update, repeat the update procedure as fol-
lows:
¤
Close the "Gigaset QuickSync" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
Accessories
Ordering Gigaset products
You can order Gigaset products from your specialist retailer.
Only use original accessories. This will avoid possible health risks and damage to
property, and also ensure that all the relevant regulations are complied with.
52
page 14).
¤
Remove the battery (
¤
Replace the battery.
¤
Complete the firmware update as
described.
If the update procedure fails several times or
you can no longer connect to the PC, pro-
ceed as follows:
¤
Close the "Gigaset QuickSync" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
¤
Remove the battery (
¤
Press and hold keys 4 and L with
the index and middle finger
.
¤
Replace the battery.
¤
Release keys 4 and L. The mes-
sage key f and the speaker key d
will flash alternately.
¤
Complete the firmware update as
described.
¢
page 9).
¢
page 9).