Gigaset SL78h User Manual page 11

If you need to open the battery cover again to connect the USB data cable or
change the battery:
¤
Remove the belt clip (if fitted).
¤
Use a fingernail placed into
the notch at the bottom of the
casing to pull the battery
cover upwards.
To change the battery, place
your fingernail in the cavity on
the casing and pull the battery
upwards.
Attaching/removing the belt clip
The handset has notches on each side for mounting the belt clip.
¤
To attach: Press the belt clip onto
the back of the handset so that
the protrusions on the belt clip
engage with the notches.
¤
To remove: Use the right thumb
to press the belt clip slightly to
the right of centre, slide the fin-
gernail of the left hand index fin-
ger between
the clip and the casing and
lift the clip upwards.
Placing the handset in the charging cradle
¤
Insert the mains adapter for the charging cradle into the mains socket.
¤
Place the handset in the charging cradle with its display facing forward.
To charge the battery, leave the handset in the charging cradle.
Please note
Only place the handset in the charging cradle that is intended for it.
First steps
9