Installing A Rom Module - Epson Aculaser C4000 Setup Manual

2. Push the DIMM straight into the slot, until the clips come up
to hold the memory module securely in place.
c
If you do not install other options, skip to "Replacing the circuit
board tray" on page 27.

Installing a ROM Module

Depending on the country of purchase, optional ROM modules
that expand your printer's features may be available.
c
Caution:
Before you install a ROM module, be sure to discharge any static
electricity by touching a grounded piece of metal. Otherwise, you
may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
Caution:
Do not force the DIMM into the slot.
Be sure to insert the DIMM facing the correct way.
Do not remove any modules from the circuit board.
Otherwise, the printer will not work.
Be sure that one module is installed in S0 slot.
Installing Options
25