LevelOne WAP-3000 Technical Specifications

11g Wireless Access Point
H/W Version: 1
Product Overview
The LevelOne WAP-3000 11g Wireless Access
Point acts as a bridge between wired Ethernet
and Wireless 11b/g networks for wireless clients
to access available wired and wireless networks.
Multiple Operation Modes
The WAP-3000 supports AP, AP Client, WDS
bridging and Repeater wireless operation
modes for flexible deployment and use within
a standard Local Area Network. For standard
operations, the WAP-3000 connects to a LAN,
broadband ADSL router or network switch and
provides instant network access to connected
wireless clients. With WDS+AP mode the
WAP-3000 is able to act as a bridge between
two or more networks, combining them into a
single network to provide wireless users with
Key Features
- IEEE 802.11b/g compliant Wireless Access Point
suitable for extending an existing LAN
- Features a 1-port Fast Ethernet interface
- Provides a wide area coverage range
- Features WPA, WPA2, 64/128-bit WEP
encryption for a secured wireless network
- Supports multiple wireless operation modes
- Full LED display panel for error detection and
network monitoring
- Compact design for desktop or wall-mounting
- Plug-and-Play enabled for easy setup and
configuration
- Web-based configuration interface

1
access to both networks. In Repeater mode, the
WAP-3000 extends the wireless area network to
different locations.
Robust Wireless Security
The WAP-3000 provides 64/128-bit WEP
encryption as well as WPA, WPA2 secured
connectivity for securing the Wireless Area
Network and to prevent unauthorized access.
Plug-and-Play Expansion of Home/Office
Network
The LevelOne WAP-3000 Wireless AP is an
easy to install "plug-and-play" access point
with an easy to use Web-based user interface.
The WAP-3000 requires little set-up and
configuration and features an LED display for
quick monitoring of network errors and activity.
2 3 4
Works Well With
WNC-0305USB
54 Mbps Wireless USB Adapter
WPC-0301
11g Wireless CardBus Card
WAP-3000
1. LED Indicators
2. Reset Button
3. LAN Interface
4. Power Port