Using The Channel Setup Menu - Sony TRINITRON KV-27FS100 Service Manual

Using the Channel Setup
To access the Channel Setup menu, refer to the following steps:
To Display To Highlight
Press f to highlight an option then press
Use the
Favorite 1
favorite channel, then press
Channels
Quick access
Use the
2
to favorite
channels.
channels
Press
3
selected channel.
Press
4
✍
To use Favorite Channels: Exit all menus and press
desired channel number and press
Use the
Cable
to select it.
On:
Off:
✍
After changing your cable settings, you will need to perform Auto Program.
Use the
Channel Fix
to select it.
Off:
2-6:
AUX 2-6:
Video 1:
Menu
To Select
.
F or f buttons to select the position (1-8) where you want to set a
F or f buttons to find the channel you want to add to your favorite
to select the channel. The TV will automatically change to the
G to return to the Channel Setup menu or press
.
F or f buttons to select from one of the following options, then press
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
F or f buttons to select from one of the following options, then press
Channel Fix is not set.
Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box's or VCR's remote control for channel selection.
Use this setting instead of the 2-6 if you want to change channels
using a cable box, VCR or satellite receiver and you've connected it
to the AUX input (KV-27FS200, KV-32FS200, KV-36FS200 only).
Select from available video inputs when you have connected video
equipment (e.g. satellite receiver) and you want your TV fixed to it.
Using the Menus
Video Audio Channel
Favorite Channels
Cable : On
Channel Fix: Off
Auto Program
Channel Skip/Add
Channel Label
Program favorite
channels
Move: Select:
.
F f
. Press or to move the cursor to the
Parent Timer Setup Basic
Program
End:
to exit.
27