Osd Logo Upload - Samsung NC221 User Manual

2
Using "PCoIP"

2.4.11 OSD Logo Upload

Using the OSD Logo Upload
Configuring the settings
1
Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2
Enter the IP address set for the product in the URL address field on the PC to access the product
administrative web page.
3
Log in (Log In) and select Upload
image below.)
4
Select a new file to replace the logo and press Upload.
Make sure the OSD logo file is a 24bpp Bitmap file that does not exceed 256x64 pixels.
page, change the logo displayed on the Teradici OSD.
OSD Logo. The OSD Logo Upload page appears. (See the
2 Using "PCoIP"
65