Download Print this page

Technical Specifications - Intel DG43NB series Brochure & Specs

Desktop boards
Hide thumbs Also See for DG43NB series:

Advertisement

Technical Specifications

Processor
Processor Support
• Intel® Core™2 Quad** processor in the LGA775
package
• Intel® Core™2 Duo processor in the LGA775
package
• Intel® Pentium® Dual-Core processor in the
LGA775 package
• Intel® Celeron® Dual-Core processor in the
LGA775 package
• Intel® Celeron® processor 400 sequence in the
LGA775 package
• Supports Intel® 64 Architecture
2
Chipset
Intel® G43 Express Chipset (DG43NB)
or Intel® P43 Express Chipset (DP43TF)
• Intel® 82G43 Graphics and Memory Controller
Hub (GMCH) (DG43NB)
Intel® 82P43 Memory Controller Hub (MCH)
(DP43TF)
• Intel® 82801JB I/O Controller Hub (ICH10)
Graphics Memory Controller Hub (GMCH)
or Memory Controller Hub (MCH)
• Designed to support up to 4 GB
(DG43NB)
1
and 8 GB
1
(DP43TF) of system memory
using DDR2 800 / 667 SDRAM memory
• Intel® Fast Memory Access
• Intel® Graphics Media Accelerator X4500
with Intel® Clear Video Technology (DG43NB)
Intel® I/O Controller Hub (ICH)
• Six SATA (3.0 Gb/s) ports
• Intel® PRO 10/100/1000 network connection
• Twelve Hi-Speed USB 2.0 ports (six back panel
ports and an additional six USB ports via three
internal headers)
System resources and hardware (such as PCI and PCI Express*) require physical memory address locations that can reduce available addressable system memory. This could
1
result in a reduction of as much as 1 GB or more of physical addressable memory being available to the operating system and applications, depending on the system configuration
and operating system.
64-bit computing on Intel® architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers and applications enabled for Intel® 64
2
architecture. Processors will not operate (including 32-bit operation) without an Intel 64 architecture-enabled BIOS. Performance will vary depending on your hardware and
software configurations. See http://developer.intel.com/technology/intel64/index.htm for more information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES
RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Intel, the Intel logo, Intel. Leap ahead., Intel. Leap ahead. logo, Intel Core, Pentium, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
** Supports 95 W Thermal Design Power, Intel® Core™2 Quad Processors with 1333 / 1066 MHz System Bus. For information, visit processormatch.intel.com
Copyright © 2008 Intel Corporation. All rights reserved. 0508/TC/MS/PDF
System BIOS
• 32 Mb Flash EEPROM with Intel® Platform
Innovation Framework for EFI Plug and Play,
IDE drive auto-configure
• Advanced configuration and power interface
V1.0b, DMI 2.0, multilingual support
• Serial Peripheral Interface (SPI) Flash
Intel® Rapid BIOS Boot
• Optimized POST for faster access to PC from
power-on
System Memory
Memory Capacity
• Two 240-pin DIMM connectors supporting
up to two double-sided DIMMs (DG43NB)
• Four 240-pin DIMM connectors supporting
up to four double-sided DIMMs (DP43TF)
Memory Types
• DDR2 800 / 667 SDRAM memory support
• Non-ECC Memory
Memory Modes
• Dual- or single-channel operation support
Memory Voltage
• 1.8 V
Hardware Management Features
• Processor fan speed control
• System chassis fan speed control
• Voltage and temperature sensing
• Fan sensor inputs used to monitor fan activity
• Power management support for ACPI 1.0b
High-Performance Intel® 82567V Gigabit
Network Connections
• High quality and reliability with Intel's
world-class manufacturing and validation
319784-001US
Expansion Capabilities
• Three PCI bus add-in card connectors
• Three PCI Express* x1 bus add-in card
connectors
• One PCI Express 2.0 x16 graphics connector
• Ultra ATA 100 / 66 devices
Jumpers and Front-Panel Connectors
Jumpers
• Single configuration jumper design
• Jumper access for BIOS maintenance mode
Front-Panel Connectors
• Reset, HDD LED, Power LEDs, power on/off
• Three front-panel Hi-Speed USB 2.0 headers
• One 1394a header
• Front-panel audio header
• One serial header
Mechanical
Board Style
• ATX 2.2-compliant
Board Size
• 11.6" x 9.6" (29.46 cm x 24.38 cm)
Baseboard Power Requirements
• ATX12V
Environment
Operating Temperature
• 0° C to +55° C
Storage Temperature
• -20° C to +70° C
Regulations and Safety Standards
United States and Canada
CSA/UL 60950-1, First Edition
(Binational Standard)
Europe
(Low Voltage Directive 2006/95/EC)
EN 60950-1:2006
International
IEC 60950-1:2001, First Edition
EMC Regulations
(tested in representative chassis)
United States
FCC 47 CFR Part 15, Subpart B
Canada
ICES-003 Class B
Europe
(EMC Directive 2004/108/EC)
EN 55022:2006 and EN 55024:1998
Australia/New Zealand
EN 55022:2006 Class B
Japan
VCCI V-3/04.04, V-4/03.04, Class B
South Korea
KN-22:2005 and KN-24:2005
Taiwan
CNS 13438:2006 Class B
International
CISPR 22:2005 +A1:2005 +A2:2006 Class B
Environmental Compliance
Europe
Europe RoHS (Directive 2002/95/EC)
China
China RoHS (MII Order # 39)
Lead-Free: The symbol is used to
identify electrical and electronic
assemblies and components in which
the lead (Pb) concentration level in any
of the raw materials and the end product is not
greater than 0.1% by weight (1000 ppm). This
symbol is also used to indicate conformance to
lead-free requirements and definitions adopted
under the European Union' s Restriction on Haz-
ardous Substances (RoHS) directive, 2002/95/EC.
Ordering Information: See the Intel
Web site at www.intel.com. For the
most current product information,
visit developer.intel.com/design/
motherbd/

Advertisement

loading

This manual is also suitable for:

Dp43tf classic series