Adding A Camera Id Or Title - Honeywell HCD484L User Manual

Adding a Camera ID Or Title

Adding a camera ID is useful when there are a number of
cameras in your network. To add a camera ID or title, enter
the SETUP MENU, select CAMERA ID and press MENU.
Figure 10
Menu Item
CAM ID
DISPLAY
POSITION
TITLE
RETURN
Entering a Camera Title
1. Move to the first character of the TITLE: using the + or
– menu controls on the rear of the camera.
2. Use the UP, DOWN, +, – menu controls to select the
first character in the title, then press the MENU key to
set the character.
Rev 2
Adding Camera ID Or Title
CAM ID: 002
DISPLAY: TITLE
POSITION: T.R.
1 2 3 4 5 6 7 8 9 A B C D E F
G H I J K L M N P Q R S T U V W
X Y Z a b c d e f g h i j k l m
n o p q r s t u v w x y z , . :
; ~ ! ? $ % * & / < > + - =
TITLE: HCD484
RETURN
Option Description
0 The number assigned each camera in
001 ... your network, from 000 to 255.
255
0: The ID is not displayed on the screen.
TITLE Select what is displayed on the screen
ID (Camera TITLE, ID or nothing).
OFF
T.R. Select where you want the Camera ID or
B.R. Title to appear on the display (Top Right,
B.L. Bottom Right, Top Left, Bottom Left, and
T.L. No Display).
NO DISP
Enter a name for the camera. Maximum
10 characters, including spaces.
Press MENU to return to the main
SETUP MENU.
12 G-113079-002
02/07