Alignment Instruction - Daewoo DTH-2930SSFV Service Manual

4-2) Vertical Position Adjustment.
- Select V.SLOPE item, adjust V.SLOPE data value till the horizontal line in the centre of the
video signal is just at the position where the blanking stars.
- Select V.CENTER item, adjust V.CENTER data value to center the raster properly on the screen.
4-3) Vertical Size Adjustment
- Select V.SIZE item, adjust V.SIZE data value to proper vertical size as follows.
4-4) Horizontal Position Adjustment
- Select H.CENTER item, adjust H.CENTER data value to obtain proper horizontal centering of
the internal cross pattern at the left and right of the screen.
4-5) Horizontal Size adjustment
- Select H.SIZE item, adjust H.SIZE value to proper horizontal size.

ALIGNMENT INSTRUCTION

-11-