Table of Contents
Advertisement
5. On Screen Display
②, ③
⑤
①
<Fig5-1. OSD Information Display>
5.1 Understanding the On-Screen Display
a. Press MENU briefly to confirm the current operation setup.
The information (see Fig 5-1) will disappear after five seconds
if there is no button action.
b. When it zoom in or out pressing UP or DOWN key,
whole OSD Information will appear and then disappear.
Press (+) , (-) button, only upper part of OSD Information
( for displaying camera mode ) will appear and then disappear.
(It is for checking current whole camera mode and zoom position )
c. Even though the OSD message disappears the Camera ID
or Title will continue to display. If you do not wish to display the ID,
you can change the display position. (see 5.11)
Options are: Bottom Right, Top Left, Top Right, Non display.
* If you do not need to display the Operating OSD (for example,
for an external text overlay board), it can be set to OFF at all times
through a remote control using RS232C or RS485 connection.
①
②
②, ③
③
④
⑥
④
⑤
②, ③
⑥
- 11 -
FUNCTION
OSD Format
DESCRIPTION
ZOOM
Dx2.5 >>TELE
Zoom TELE
DISPLAY
Dx1.0 << WIDE
Zoom WIDE
CAMERA ID
None display
ID : 0
ID : 002
ID : 1 ~ 255
TITLE
See 5.11
■■...■■
Back Light
Non display
Back Light OFF
BL
Back Light ON
Shutter
1/60 (1/50)
NTSC:1/60, PAL :1/50
Speed
FL
NTSC:1/120, PAL:1/100
1/250
1/250
1/500
1/500
1/1000
1/1000
1/2000
1/2000
1/4000
1/4000
1/10000
1/10000
1/20000
1/20000
1/50000
1/50000
ATW
Auto Trace White Balance
WB MODE
AWC
One Push mode
IN
Indoor Preset (3200°K)
FRS
Fluorescent (4200°K)
USR
User mode
OUT
Outdoor preset (5400°K)
MWB
Manual mode
<Table5-1. Operating OSD description>
Advertisement
Table of Contents
