Settings; Phone Settings - Philips S10 User Manual

13 Settings

In [Settings] menu, you can customize the
phone to your preferences.

Phone settings

Set the display language
1
Tap from the main menu screen.
2
Select [Phone settings] > [Language].
3
Select a language.
» The setting is saved.
ECO mode
The ECO mode reduces the transmission
power and radiation of the handset and base
station when you are on a call or when the
phone is in standby mode.
1
Tap from the main menu screen.
2
Select [Phone settings] > [Eco mode].
3
Select [On]/[Off].
» The setting is saved.
is displayed in standby mode.
»
Note
•
When ECO mode is set to [On], the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1
Tap from the main menu screen.
2
Select [Phone settings] > [ECO+ mode].
3
Select [On]/[Off].
32 EN
» The setting is saved.
Note
•
Make sure that all the handsets registered to the base
station are S9 series or S10 series in order to have the
ECO+ feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to "listen" more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and contact browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
The following table shows you the current
status of the handset screen with different ECO
mode and ECO+ mode settings.
ECO ECO+
Handset icon display
mode mode
[Off] [Off]
[Off] [On]
ECO+ mode is activated
during standby mode .
[On] [Off]
[On] [On]
to
mode is activated in
standby mode.
Name the handset
The name of the handset can be up to 16
characters. It helps to identify a handset for
conference calls if multiple handsets are
connected to the base.
1
Tap from the main menu screen.
2
Select [Phone settings] > [Phone name].
3
Enter or edit the name with the keyboard.
» The setting is saved.
and are off.
is displayed only after the
is displayed.
is displayed and changed
when the ECO+