Restore the default announcement
1
Tap
from the main menu screen.
2
Select [Announcement] > [Answer &
rec.] or [Answer only] > [Use default].
» A confirmation request is displayed on
the handset.
3
Tap [Yes] to confirm.
» The default announcement is restored.
Set the answering machine language
You can change the language used for the pre-
recorded default announcements.
1
Tap
from the main menu screen.
2
Select [Announcement] > [Voice
language].
3
Select a language.
» The setting is saved.
Incoming messages
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and a confirmation request is displayed
on the handset.
Note
•
If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to the
caller directly.
Note
•
If the memory is full, the answering machine switches
to [Answer only] automatically. Delete old messages to
receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
1
Tap
from the main menu screen.
2
Select [Play].
» New messages start playing. Old
messages start playing if there is no
new message.
•
Tap [Back] to stop listening..
Press +/- on the left side of the handset to
•
increase/decrease the volume.
Delete an incoming message
1
When you listen to the message, tap .
» The current message is deleted.
Delete all old incoming messages
1
Tap
from the main menu screen.
2
Select [Delete all].
» The handset displays a confirmation
request.
3
Select [Yes] to confirm.
» All old messages are permanently
deleted.
Note
•
You can only delete the read messages. No deleted
messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press
to answer the call.
Set the ring delay
You can set the number of times the phone
rings before the call goes to the answering
machine.
EN
29