System/Configuration Connector X11; Table 27: Connector X10 For Boot Settings And Some Configuration Settings; Table 28: Connector X11 For Configuration And System Settings - Siemens ERTEC EB 200 Manual

Table 27: Connector X10 for Boot Settings and Some Configuration Settings

8.2

System/Configuration Connector X11

Connector X11 is used to specify the remaining configuration modes and various system functions on the EB 200 (for
a description of system and configuration modes, refer to Section 2.1.2).
Connector name: X11
Connector type: 2x8 pin male connector
Pin Signal Name
1 M
2 CONFIG[5]
3 M
4 CONFIG[6]
5 M
6 SPI_CONFIG
7 M
8 SYS_CONFIG[0]
9 M
10 SYS_CONFIG[1]
11 M
12 SYS_CONFIG[2]
13 M
14 SYS_CONFIG[3]
15 M
16 SYS_CONFIG[4]

Table 28: Connector X11 for Configuration and System Settings

Copyright © Siemens AG 2010. All rights reserved.
Technical data subject to change
Type Meaning
41
EB 200 Manual
Version 1.1.4