Taking Photographs - Olympus SP-100EE Instruction Manual

Using basic functions

Taking photographs

1
Press the n button to turn on the camera.
When the camera is turned on, the monitor will turn on.
2
Set the mode dial to P.
In mode P, the camera automatically adjusts
shutter speed and aperture in response to
subject brightness.
3
Frame the shot.
• When holding the camera, take care not
to cover the flash, microphone or other
important parts with your fingers, etc.
• To shoot using the viewfinder (EVF), press
the u (EVF) button. Every time you
press the u (EVF) button, the viewfinder
(EVF) and the back monitor are switched
alternately.
• If the display in the viewfinder (EVF) looks blurry, look through the
viewfinder (EVF) and rotate the diopter adjustment dial (P. 4) until the
display is in sharp focus.
4
Press the shutter button
halfway down to focus.
The camera was unable to focus
if the AF target mark flashes red.
Try focusing again.
• The shutter speed and
aperture value are displayed
in red if the camera is unable
to achieve optimal exposure.
12 EN
Press halfway
Shutter speed
AF target
P P
1/400 1/400 F6.5 F6.5
Aperture value