For universal remotes, this TV follows SONY's universal remote code. You need to find the
actual code from your cable or satellite or universal remote provider.
1. POWER – Turns the TV on or off.
2. SOURCE – Press this button to cycle through the INPUT source.
3. CC – Cycles between different closed captioning modes.
4. MTS – Selects stereo, mono, or second audio programming.
5. MUTE – Turns the sound off from the TV. To un-mute either press VOL(+) or press the MUTE
button again.
6. NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are watching TV.
The channel will change after 2 seconds.
7. (-) – Inserts the dash for selecting digital channels directly.
8. R – Returns to the previous channel.
9. GUIDE – Opens the current digital channel information guide (antenna only).
10. INFO – Shows the display info.
11. ▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV's menu.
Press the ENTER button when you want to select a particular option.
12. MENU – Brings up the main TV menu on the screen.
13. EXIT – Exit the main TV menu on the screen.
14. VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
15. ASPECT – Press this button to change the picture's cropping method.
16. FREEZE – Press this button to freeze current picture.
17. SLEEP – Turns the TV off in a specific set of time dependent on your selection.
18. FAVORITE – Gives you your list of favorite channels.
19. ADD/DEL – Adds or Deletes current channel from the favorite list.
20. FAV(-) – Press this button to change to the previous favorite channel.
21. FAV(+) – Press this button to change to the next favorite channel.
22. PICTURE – Selects various preset picture settings.
23. SOUND - Selects various preset sound settings.
24. TV – This button select the source TV.
25. USB – Launches the USB reader function for the pictures and music.
The following are buttons used only on the Sceptre Sound Bar.
1.
S. source – This button changes the signal source of the Sound Bar.
2.
S. mode – This button changes the sound mode of the Sound Bar.
3.
S. vol(-) – This button decreases the volume of the Sound Bar.
4.
S. vol(+) – This button increases the volume of the Sound Bar.
The following are buttons used only on Sceptre 3D HDTVs.
1.
RED A – This button changes the video from 2D to 3D
2.
GREEN B – This button changes the picture from 3D to 2D if you are playing a 3D
signaled video.
3.
YELLOW C – This button changes the 3D effect on pivoting the picture to the left
or right.
4.
BLUE D –This button can show/hide the the 3D channel list.
- 16 -
www.SCEPTRE.com
SCEPTRE E19 HDTV User Manual