Advertisement
Amplifi er Assembly replacement:
1
Five screws need to be removed from
the SWA2801z amplifi er assembly using
the 5mm allen wrench. Two screws are
located on the left side, three on the
right. See the following pictures and
further instructions. Make sure the wheels
are facing upwards and the front of the
cabinet is facing down.
2
Two screws located on the left side
of the SWA2801z patiently awaiting
removal.
3
The last remaining three screws
are located on the right side of the
SWA2801z (holding the bottom of the
amplifi er assembly to the cabinet).
4
Keep the fi ve screws in a safe place.
Note: There are two different screws that
connect the cabinet to the amplifi er
assembly (as seen above).
7
Advertisement
