Sony KV43TR27 Service Manual page 9

Make sure that the clock has been set correctly before
Example: To set the TIMER for a program which begins at IO:30 PM on channel 12
1
Press TIMERBLOCK once to change from
"normal page" to "clock page."
2
Press TIMER/BLOCK before the "AWf'PM"
page ,*
3
Press 1.0.3.0, AM/PM, ENTER
Numbers will "v,"W lo lndlcate that the bme has
W
been SB,
.
4
Press 1,2, ENTER (0 not necessary)
Numbers will "wmk" to mdlcate that the
channel has been set
The TIMER lamp wtll ltght up to lndlcate that the TIMER has
been set
If you have made a nIlstake, p'ess CLEAR and ref"m 10 step 3
A, the preset tme, the selected channel WI,, appear on the screen
and the TIMER lamp wtll go out The TIMER w,,, operate whether
you are wa,ch,ng a TV Program or a VCR playback. or eve" If you
have turned OR the TV
'OFF ,"d,ca,,on ",,I, appear on the screen for 1 m,n",e If a bunon
setting the program start TIMER.
"clock page"
TIMER/BLOCK
"TIMER
6 A M / P M ENTER
me TIMER operates Only once. but the bme and the channel I",,,
If you want to preset the same channel at the same time for a
To clear the TlUER setting. summon "TIMER page" and press
CLEAR
To reset. clear the seblng and lollaw the s,ePs from step 3
page"