Sony KV43TR27 Service Manual page 8

Example: To set the clock to 9:OS PM
Press TIMER/BLOCK once to change from "normal page"
1
to "clock page.-
T I M E W B L O C K
2
Press 0.9,O. 5 AM/PM (0 necessary).
If you have performed the operation correctly, press
3
ENTER.
The numbers will "wmk" to Indicate that the clock has been
set. (The 0 m front will disappear.) ENTER
If you have made a mistake, press CLEAR and return to step 2.
The "AM/PM" indication will disappear after 2 seconds.
To summon "TIMER page," press TIMER/BLOCK before
the "AM"/"PM" indication disappears.
To retwn to "normal page," press TIMER/BLOCK after
the "AM"/"PM" indication has disappeared.
To reset the clock, s"mm~" "cloCk page" and
Press CLEAR
disappears. Then follow the
Make sure that the clock has been set correctly before Setting the channel BLOCK.
Example: To set the BLOCK for a program
Press TIMER/BLOCK three times to change from "normal
1
page" to "BLOCK page."
"clock page"
Press 0.9.3.0. ENTER (0 necessary).
2
Numbers will "wmk" to Indicate that the time has been Set.
Press 8, ENTER (0 not necessary). Numbers will "wmk" to
The BLOCK has now been set.
If you have made a mstake, press CLEAR and return to
step 2.
At the preset time, the picture of the selected channel will
be blocked from wew and the sound will be muted.
A red "BLOCKED' indication will appear on the screen while
the channel is blocked.
Normal reception will be resumed after 12 hours.
To return to normal reception white the channel is blocked,
recall "BLOCK page" and press CLEAR.
The BLOCK setting blocks a speafled channel for the same
T clear BLOCK setting. summon "BLOCK page" and Press
O
CLEAR.
To reset, clear the setting and follow fhe steps above from
which begins at 930 AM on channel 9
T I M E W B L O C K
"BLOCK
(indications
page"
red)