Honda EXW171S Owner's Manual page 3

Thank you for purchasing a Honda generator/welder.
This manual covers the operation and maintenance of the EXWl71S
generator/welder. All information in this publication is based on the latest
product information available at the time of printing.
Honda Motor Co., Ltd. reserves the right to make changes at any time
without notice and without incurring any obligation.
No part of this publication may be reproduced without written permission.
This manual should be considered a permanent part of the
generator/welder and should remain with the generator/welder if it is
resold.
This generator/welder is equipped with a U.S.D.A. qualified spark arrester
which requires periodic maintenance to ensure its effectiveness. It is illegal
in some areas to operate an engine without a spark arrester; check local
laws and regulations.
mm
Indicates a strong possibility of severe personal injury or loss of
life if instructions are not followed.
CAUTION: Indicates a possibility of personal injury or equipment damage
if instructions are not followed.
NOTE: Gives helpful information.
If a problem should arise, or if you have any questions about your
generator/welder, consult an authorized Honda dealer.
l
Welding is potentially a very hazardous activity. It should only be at-
tempted by a trained welder with a thorough knowledge of proper
welding techniques and safety procedures.
l
Honda generator/welders are designed to give safe operation and
dependable service if operated according to instructions. Read and
understand this Owner's Manual before operating the generator/welder.
Failure to do so could result in personal injury or equipment damage.
1