Tenda N60 User Manual
  1. Manuals
  2. Brands
  3. Tenda Manuals
  4. Wireless Router
  5. N60
  6. User manual

Tenda N60 User Manual

Concurrent dual band wireless n600 gigabit router
Hide thumbs Also See for N60:
Table of Contents

Advertisement

Quick Links

Concurrent Dual Band Wireless N600 Gigabit Router
1

Advertisement

Table of Contents
loading

Related Manuals for Tenda N60

Summary of Contents for Tenda N60

  • Page 1 Concurrent Dual Band Wireless N600 Gigabit Router...

  • Page 2: Copyright Statement

    Shenzhen Tenda Technology Co., Ltd. Without prior expressed written permission from Shenzhen Tenda Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize, reproduce, or translate it into other languages.

  • Page 3: Table Of Contents

    Concurrent Dual Band Wireless N600 Gigabit Router Table of Contents COPYRIGHT STATEMENT....................2 CHAPTER 1 PRODUCT OVERVIEW ................4 1.1 W .....................4 HAT IT DOES 1.2 F ......................4 EATURES 1.3 P ...................5 ACKAGE ONTENTS CHAPTER 2 HARDWARE ....................6 2.1 P ....................6 ANEL VERVIEW 2.2 M ..............7...

  • Page 4: Chapter 1 Product Overview

    Chapter 1 Product Overview 1.1 What it does The Tenda N60 Concurrent Dual Band Wireless N600 Gigabit Router accommodates users looking for extreme wireless performance. Delivering up to 300+300Mbps wireless speed, it uses dual band technology to deliver 2.4GHz and 5GHz wireless signals simultaneously, allowing you to check email and browse the Internet using the 2.4GHz while streaming...
  • Page 5 Please unpack the box and check the following items: N60 Concurrent Dual Band Wireless N600 Gigabit Router Power Adapter Quick Installation Guide CD-ROM 1-meter Ethernet cable If any of the above items are incorrect, missing, or damaged, please contact your Tenda reseller for immediate replacement.

  • Page 6: Chapter 2 Hardware

    Concurrent Dual Band Wireless N600 Gigabit Router Chapter 2 Hardware 2.1 Panel Overview Front Panel Power LED: A solid light indicates a proper connection to the power supply while a blinking light indicates system is functioning correctly. WPS LED: A blinking light indicates router is performing WPS authentication on a client device.

  • Page 7: R Equirements

    Concurrent Dual Band Wireless N600 Gigabit Router Back Panel WAN: Internet port RJ-45 for connection to an Internet-enabled xDSL Modem/Cable Modem or existing Ethernet. IPTV IPTV port for connection to a network set-top box. However such port can function as a LAN port if IPTV STB port is not enabled. LAN/1/2/3: 3 LAN ports RJ-45 for connection to PC’s NIC or uplink to a hub,...
  • Page 8 Concurrent Dual Band Wireless N600 Gigabit Router 2. Connect one of the LAN ports on the Router to the NIC port on your PC using an Ethernet cable. 3. Connect the Ethernet cable from Internet side to the WAN port on the Router.

  • Page 9: Chapter 3 Login To Web Utility

    Concurrent Dual Band Wireless N600 Gigabit Router Chapter 3 Login to Web Utility The device’s default IP is 192.168.0.1. You can change it to accommodate your own needs. Here in this manual, we use the default IP. Connect you PC to the router and config your PC’s TCP/IP settings following instructions in appendix 1 hereto.
  • Page 10 Concurrent Dual Band Wireless N600 Gigabit Router Login to web utility Launch a web browser on your PC and enter http://192.168.0.1 as below. Then press “Enter”. Enter user name and password in corresponding fields on window below (Default user name and password are respectively set to admin). Note: For security purpose, please change the default user name and password after you logged in to web utility.

  • Page 11: Chapter 4 Configurations

    Concurrent Dual Band Wireless N600 Gigabit Router Chapter 4 Configurations This chapter delivers a detailed presentation of router’s functionalities and features under 8 main menus below, allowing you to manage the router with ease. During operation, if you are not clear about a certain feature, you can simply click the “Help”...
  • Page 12 Concurrent Dual Band Wireless N600 Gigabit Router Connected: Indicates that the router has been connected to your ISP. Internet Connection Type: Displays current Internet connection type. WAN IP: Displays WAN IP address. Subnet Mask: Displays WAN subnet mask. Gateway: Displays WAN gateway address. DNS Server: Displays WAN DNS address.

  • Page 13: N Etwork

    Concurrent Dual Band Wireless N600 Gigabit Router Wireless Radio: Displays whether wireless is enabled or not. Wireless MAC address: Displays MAC address of the router’s wireless interface. SSID: Displays current SSID. 802.11 Mode: Displays currently active network mode. Country: Displays current country. Channel: Displays current channel.
  • Page 14 Concurrent Dual Band Wireless N600 Gigabit Router 4.2.1 LAN Settings IP Address: Router’s LAN IP. The default is 192.168.0.1. You can change it according to your need. Subnet Mask: Router’s LAN subnet mask. Note: 1. If you change the device’s LAN IP address, you must enter the new one in your browser to get back to the web-based configuration utility.
  • Page 15 Concurrent Dual Band Wireless N600 Gigabit Router Internet connection Type: Displays a list of available Internet connection types. MTU: Maximum Transmission Unit. The default value is1500. Note: DO NOT change the factory default MTU value unless necessary as an improper MTU value may degrade your network performance or even lead to network malfunction.
  • Page 16 Concurrent Dual Band Wireless N600 Gigabit Router MTU: Maximum Transmission Unit. The default value is1500. Note: DO NOT change the factory default MTU value unless necessary as an improper MTU value may degrade your network performance or even lead to network malfunction.
  • Page 17 Concurrent Dual Band Wireless N600 Gigabit Router Internet connection Type: Displays a list of available Internet connection types. PPTP Server IP: Enter the IP address of a PPTP server. Username/Password: Enter Username/Password defined by the PPTP server. Address mode: Select “Dynamic” if you don’t get any IP info from the PPTP server side, otherwise select “Static”.
  • Page 18 Concurrent Dual Band Wireless N600 Gigabit Router Internet connection Type: Displays a list of available Internet connection types. L2TP Server IP Address: Enter the IP address of a L2TP server. Username/Password: Enter Username/Password specified by the L2TP server. Address Mode: Select “Dynamic” if you don’t get any IP info from the L2TP server, otherwise select “Static”.
  • Page 19 Concurrent Dual Band Wireless N600 Gigabit Router PPPOE Dual Access Internet connection Type: Displays a list of available Internet connection types. Username: Enter the PPPOE account provided by your ISP. Password: Enter the PPPOE password provided by your ISP. Address mode: Select “Dynamic” if you don’t get any IP info from your ISP, otherwise select “Static”.
  • Page 20 Concurrent Dual Band Wireless N600 Gigabit Router DHCP Server-Enable: Check or uncheck the box to enable or disable the device’s DHCP server feature. Start IP Address: Enter the starting IP address for the DHCP server’s IP assignment. End IP Address: Enter the ending IP address for the DHCP server’s IP assignment.
  • Page 21 Concurrent Dual Band Wireless N600 Gigabit Router Static Assignment If you would like some devices on your network to always have fixed IP addresses, you can use this feature and manually add a static DHCP assignment entry for each such device. For example: To have a PC at the MAC address of 00:15:58:c0:d4:3f always receive the same IP address of 192.168.0.150, simply enter the IP and MAC addresses in corresponding fields and click “Add”...
  • Page 22 Concurrent Dual Band Wireless N600 Gigabit Router WAN MAC Address: Displays router's current WAN MAC address, you can manually change it. Restore to Factory Default MAC: Click it to restore router’s WAN MAC to factory default value. Clone MAC: Click to copy your PC’s MAC to router’s WAN MAC Address field. NOTE: 1.
  • Page 23 Concurrent Dual Band Wireless N600 Gigabit Router 4.3 Security Settings “Security Settings” includes the following 5 submenus. Clicking any of them enters corresponding interface for configuration. Below explains, in details, each such feature. 4.3.1 Group Settings “Group Settings” includes 2 submenus: Group Settings, User Group and Time Group.
  • Page 24 Concurrent Dual Band Wireless N600 Gigabit Router 1. Enter R_D in group name field. 2. Enter R_D IP Range in group description field. 3. Enter “192.168.0.20” and “192.168.0.30” in IP fields. 4. Click “Add “and then the “Save “button; you will find such entry in User Group list below: Time Group To create a time group, you need to specify a group name/description and a time /...
  • Page 25 Concurrent Dual Band Wireless N600 Gigabit Router 1. Enter “Working days” in group name field. 2. Enter “working days” in group description field. 3. Select the time and days. 4. Click “Save” and you will find such entry in Time Group list below: 4.3.2 Port Filter To better manage PCs in LAN, you can allow or disallow such PCs to access certain ports on Internet using the Port Filter functionality.
  • Page 26 Concurrent Dual Band Wireless N600 Gigabit Router Filter Mode: Select Deny or Allow according to your own needs. Deny Access to Internet: Disallow specified packets to pass through the router; other packets are processed according to default rule. Allow Access to Internet: Allow specified packets to pass through the router; other packets are processed according to default rule.
  • Page 27 Concurrent Dual Band Wireless N600 Gigabit Router 9. Select “Allow” from the “Default” drop-down list and check “Enable” Port Filter feature. 4.3.3 URL Filter To better control LAN PCs, you can use the URL filter functionality to allow or disallow such PC to access certain websites within a specified time range. Click “Add”...
  • Page 28 Concurrent Dual Band Wireless N600 Gigabit Router Filter Mode: Select Deny or Allow according to your own needs. Deny Access to Internet: Disallow specified packets to pass through the router; other packets are processed according to default rule. Allow Access to Internet: Allow specified packets to pass through the router;...
  • Page 29 Concurrent Dual Band Wireless N600 Gigabit Router 7. Click “Save” to display page below: 8. Select “Allow” from the “Default” drop-down list and check the “Enable” URL Filter feature.
  • Page 30 Concurrent Dual Band Wireless N600 Gigabit Router 4.3.4 MAC Address Filter To better manage PCs in LAN, you can use the MAC Address Filter function to allow/disallow such PCs to access to Internet. Click “Add” to display page below: Filter Mode: Select Deny or Allow according to your own needs. Deny Access to Internet: Disallow specified packets to pass through the router;...
  • Page 31 Concurrent Dual Band Wireless N600 Gigabit Router Click “Save” to display the following page. Select “Allow” from the “Default” drop-down list and check the “Enable MAC Filter” feature as below. 4.3.5 WAN Access Control The WAN Access Control feature allows users to configure your router from Internet via a web browser.
  • Page 32 Concurrent Dual Band Wireless N600 Gigabit Router Note: If you enter 0.0.0.0 in the IP address box, then all PCs on Internet can access your router’s Web-based utility to view or change your settings remotely once you enable the feature. If you want to allow only a PC at the IP address of 58.60.111.221 to For example: access your router’s web-based utility from Internet via port: 8080, you need to...
  • Page 33 Concurrent Dual Band Wireless N600 Gigabit Router Click “Add” to display below page. WAN Port: Enter the WAN service port. Well-Known Service Ports: The “Well-Known Service Port” lists commonly used protocol ports such as DNS 53, FTP 21 , GOPHER(70), HTTP(80), NNTP(1190), POP3(110), PPTP(1723) , SMTP(25), SOCK(1080), TELNET(23).
  • Page 34 Concurrent Dual Band Wireless N600 Gigabit Router Note: Setting WAN port hereon to the same value as that on WAN access control section will deactivate the virtual server feature. 4.4.2 DMZ Settings In some cases, we need to set a computer to be completely exposed to extranet for implementation of a bidirectional communication.
  • Page 35 Concurrent Dual Band Wireless N600 Gigabit Router ID: Entry ID. Remote Host: Description of a remote host that receives/sends responses. WAN Port: Port on router side. LAN Host: Description of an internal host that receives/sends responses. LAN Port: Port on host side. Protocol: Indicates whether to perform TCP or UDP port forwarding.
  • Page 36 Concurrent Dual Band Wireless N600 Gigabit Router Enable DDNS: Check the box to Enable or Disable the DDNS feature. DDNS Service Provider: Select your DDNS service provider from the drop-down menu (Dyndns or Noip). Username: Enter the DDNS username registered on DDNS server. Password: Enter the DDNS password registered on DDNS server.
  • Page 37 Concurrent Dual Band Wireless N600 Gigabit Router Destination Network: Enter a destination IP address. Subnet Mask: Enter a Subnet Mask that corresponds to the destination IP address you entered. Gateway: Next-hop IP address. 4.4.6 Bandwidth Control To better manage bandwidth allocation and optimize network performance, use the Custom Bandwidth Allocation feature.
  • Page 38 Concurrent Dual Band Wireless N600 Gigabit Router Enable: Check/uncheck to enable/disable current bandwidth entry. IP Range: Enter a single IP or an IP range. Upstream Bandwidth Limit: Max total upload bandwidth for a specified PC or a range of PCs. Downstream Bandwidth Limit: Max total download bandwidth for a specified PC or a range of PCs.
  • Page 39 Concurrent Dual Band Wireless N600 Gigabit Router 4.5 Wireless Settings Wireless Settings includes 8 submenus as shown in the screenshot below. Clicking any tab enters corresponding interface for configuration. 4.5.1 Basic Settings This section allows you to manage your wireless network (2.4G or 5G). You can config country code, wireless network name (SSID), network mode and channel settings, etc the way you want.
  • Page 40 Concurrent Dual Band Wireless N600 Gigabit Router SSID Broadcast: Select “Enable”/“Disable” to make your wireless network visible/ invisible to any wireless clients within coverage when they perform a scan they perform a scan to see what’s available. When disabled, such wireless clients will have to first know this SSID and manually enter it on their devices if they want to connect to the SSID.
  • Page 41 Concurrent Dual Band Wireless N600 Gigabit Router SSID Broadcast: Select “Disable” to hide your SSID. When disabled, no wireless clients will be able to see your wireless network when they perform a scan to see what’s available. If they want to connect to your router, they will have to first know this SSID and then manually enter it on their devices.
  • Page 42 Concurrent Dual Band Wireless N600 Gigabit Router 1. OPEN/SHARED WEP is intended to provide data confidentiality comparable to that of a traditional wired network. Two methods of authentication can be used with WEP: Open System authentication and Shared Key authentication. Security Mode: Select a proper security mode from the drop-down menu.
  • Page 43 Concurrent Dual Band Wireless N600 Gigabit Router 3. WPA2-PSK The later WPA2 protocol features compliance with the full IEEE 802.11i standard and uses Advanced Encryption Standard (AES) in addition to TKIP encryption protocol to guarantee better security than that provided by WEP or WPA. Cipher Type: Select one cipher type from AES (advanced encryption standard), TKIP (temporary key integrity protocol) or TKIP&AES.
  • Page 44 Open Scan option. WDS Mode: Select Disable or Repeater Mode. For example: If you want to implement the WDS feature on 2 N60 routers labeled N60-1 and N60-2 respectively, then first select “Repeater Mode” and follow steps...
  • Page 45 Concurrent Dual Band Wireless N600 Gigabit Router 1. If you already know N60-2’s MAC address, then you can manually enter it on N60-1 and click “Save”. 2. Or you can use the Open Scan option. 1) Click the “Open Scan” button to search and select N60-2’s SSID, confirm on the appearing dialogue box and then click “Save”.
  • Page 46 Concurrent Dual Band Wireless N600 Gigabit Router 3. Repeat steps 1-2 on N60-2. After the 2 devices have added each other’s MAC address the WDS feature can be implemented. Note: 1. WDS feature can only be implemented between 2 wireless devices that both support the WDS feature.
  • Page 47 Concurrent Dual Band Wireless N600 Gigabit Router Guest Network: Check/uncheck to enable/disable the guest network feature. SSID Broadcast: Select “Disable” to hide your SSID. When disabled, no wireless clients will be able to see your wireless network when they perform a scan to see what’s available.
  • Page 48 Concurrent Dual Band Wireless N600 Gigabit Router MAC Address Filter: Selecting “Disable” means to deactivate the MAC address filter feature. “Allow” means to only allow PCs at specified MAC addresses to connect to your wireless network while “Deny” means to only block PCs at specified MAC addresses from connecting to your wireless network.
  • Page 49 Concurrent Dual Band Wireless N600 Gigabit Router 4.5.8 Wireless –Advance Settings This section allows you to config advanced settings, including Beacon interval， Fragment threshold，RTS threshold and DTIM interval, etc, for both 2.4G and 5G wireless networks. Isolates clients connecting to the private SSID. AP Isolation: A time interval between any 2 consecutive Beacon packets sent Beacon Interval:...
  • Page 50 Concurrent Dual Band Wireless N600 Gigabit Router 4.6 USB Applications The router provides a USB interface, which can be connected to a printer or USB storage device for file sharing. 4.6.1 USB Storage Enable: Check/uncheck to enable/disable file sharing feature. Device Name: Define a meaningful name to you for the device.
  • Page 51 Concurrent Dual Band Wireless N600 Gigabit Router 2. Set Access Right First select an account and click Disk. And then select a proper access right from below for each entry. R/W:Read and Write right. R: Read right. N: No right. At last click “Save”...
  • Page 52 Concurrent Dual Band Wireless N600 Gigabit Router 4.6.2 Printing Service The USB printer service allows you to connect a USB printer to the device and thus all clients on your network can print anything they want on their PCs. The device can identify a printer automatically as long as it is successfully connected.
  • Page 53 Concurrent Dual Band Wireless N600 Gigabit Router 4. Click “Next”. 5. Select “Local printer attached to this computer” and click “”Next.
  • Page 54 Concurrent Dual Band Wireless N600 Gigabit Router 6. Select “Create a new port”, Type of port: “Standard TCP/IP Port” and click “Next”. 7. Click “Next”.
  • Page 55 Concurrent Dual Band Wireless N600 Gigabit Router 8. Enter device’s LAN IP address and click “Next”. 9. Click “Standard” under Device Type and select “Generic Network Card”, then click “Next”.
  • Page 56 Concurrent Dual Band Wireless N600 Gigabit Router 10. Click “Finish”. 11. Select “Have Disk”.
  • Page 57 Concurrent Dual Band Wireless N600 Gigabit Router 12. Click “Browse”, select corresponding drive file and click “Open”. At last click “OK”. 13. Click “Next”.
  • Page 58 Concurrent Dual Band Wireless N600 Gigabit Router 14. Define a name for the printer and click “Next”. 15. Click “Finish".
  • Page 59 Concurrent Dual Band Wireless N600 Gigabit Router 4.7 IPTV Settings The IPTV feature makes it possible to enjoy online videos on your TV set via a set-top box while surfing Internet. Enable IPTV: Check/uncheck to enable/disable the IPTV feature. Enable IPTV STB Port: Check/uncheck to enable/disable the IPTV-specific port. See below for the topology:...

  • Page 60: Tool

    Concurrent Dual Band Wireless N600 Gigabit Router Note: 1. If you enabled both options mentioned above, then note below: (a). Set IPTV connection type to DHCP/dynamic IP or static IP (IMPORTANT: Note that the IP address should be on the same IP net segment as router’s WAN IP.) if the set-top box is connected to any LAN port from 1-3.
  • Page 61 Concurrent Dual Band Wireless N600 Gigabit Router 4.8.1 Time Settings This section assists you in setting the device’s system time; you can either select to set the time and date manually or automatically obtain the GMT time from Internet. Sync with Internet time servers: Time and date will be updated automatically from Internet.
  • Page 62 Concurrent Dual Band Wireless N600 Gigabit Router To update firmware, do as follows: 1. Click "Browse” to locate the firmware and "Upgrade” to update. 2. Router will reboot automatically when upgrade completes. NOTE: Do not disconnect the device from your management PC (the PC you use to configure the device) or power off it during the upgrade process;...
  • Page 63 Concurrent Dual Band Wireless N600 Gigabit Router 4.8.4 Restore to Factory Default Settings To restore all settings to the device's factory default values, click the "Restore to Factory Default” button: Factory Default Settings: User Name: admin Password: admin IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 Note: To activate your settings, you need to reboot the device after you reset it.
  • Page 64 Concurrent Dual Band Wireless N600 Gigabit Router 4.8.6 Reboot This section allows you to reboot the device. To restart your device, click the “Reboot” button. 4.8.7 Statistics Statistics displays current traffic of PCs on your LAN. Enable Traffic Statistics: Check/uncheck the box to enable/disable the Traffic Statistics feature.
  • Page 65 Concurrent Dual Band Wireless N600 Gigabit Router Note: Enabling the Traffic Statistics feature may degrade router’s packet processing capacity. So, do not enable it unless necessary. 4.8.8 Syslog The Syslog option allows you to view all events that occur upon system startup and check whether there is attack present in your network.

  • Page 66: A Ppendix 1 Config Tcp/Ip Settings On Pc

    Concurrent Dual Band Wireless N600 Gigabit Router A ppendix 1 Config TCP/IP Settings on PC This section presents you how to config your PC’s TCP/IP settings (in Windows XP and Windows 7). Before you start, make sure your PC has an installed NIC. If not, please install one first.
  • Page 67 Concurrent Dual Band Wireless N600 Gigabit Router 3. Select “Internet Protocol (TCP/IP)” on the appearing window and click “Properties” button. 4. Select “Use the following IP address” or “Obtain an IP address automatically”. a. To “Obtain an IP address automatically” simply click the corresponding button.
  • Page 68 Concurrent Dual Band Wireless N600 Gigabit Router b. “Use the following IP address” IP address: Enter 192.168.0.xxx (xxx can be any value from 2~254). Subnet mask: Enter 255.255.255.0. Default gateway: Enter 192.168.0.1. Preferred DNS server: Enter 192.168.0.1 in case that you don’t know the local DNS server address (Or contact your ISP for help).
  • Page 69 Concurrent Dual Band Wireless N600 Gigabit Router 3. Select “Internet Protocol (TCP/IP)” on the appearing window and click the “Properties” button. 5. Select “Use the following IP address” or “Obtain an IP address automatically”. a. To “Obtain an IP address automatically” simply click the corresponding button.
  • Page 70 Concurrent Dual Band Wireless N600 Gigabit Router b. “Use the following IP address” IP address: Enter 192.168.0.xxx (xxx can be any value from 2~254). Subnet mask: Enter 255.255.255.0. Default gateway: Enter 192.168.0.1. Preferred DNS server: Enter 192.168.0.1 in case that you don’t know the local DNS server address (Or contact your ISP for help).
  • Page 71 Concurrent Dual Band Wireless N600 Gigabit Router NCC Notice 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變 更設計之特性及功能。 低功率射頻電機之作用不得影響飛航安全及幹擾合法通信；經發現有幹擾現象時，應立即停用，並改善至 無幹擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信 或工業、科學及醫療用電波輻射性電機設備之幹擾。 5.25 ~ 5.35GHz 限室內使用 (802.11a used) FCC Statement Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 72: Safety Instructions

    Concurrent Dual Band Wireless N600 Gigabit Router Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable...

Table of Contents