Sangean DT-120 Service Manual page 6

2. ALIGNMENT FOR FM SENSITIVITY
a. Required Instruments
Signal Generator
SSVM
b. Alignment Procedure
Adjustment
Mode
FM L3
c. Instrument Connection
TP5
6pF
(1) Set the power switch to ON.
(2) Connect a SSVM to the HEAD PHONE JACK O/P.
(3) Connect the output of the FM signal generator to the test point (TP5).
(4) Set FM to 106MHz.
(5) Adjust L3 for maximum audio output.
Signal Generator
Procedure
L3
HEAD PHONE JACK O/P
6
SSVM
To Speaker