Advanced Picture Menu - InFocus IN5533 User Manual

Advanced Picture menu

BrilliantColor™: Produces an expanded onscreen color spectrum that delivers
enhanced color saturation for bright, true-to-life images. Choose Normal Look for
most video sources and Bright Look for most computer sources.
White Peaking: (video sources only) Increases the brightness of whites that are
near 100%.
Color Temperature: Changes the intensity of the colors. Select a listed relative
warmth value.
Force Wide: When this is off, the analog locking algorithms choose the standard
mode resolution (4:3) as the preferred default resolution. When this is on, the
analog locking algorithms choose wide mode resolution (16:10) as the preferred
default resolution.
Overscan: Removes noise around the video image.
Phase: Adjusts the horizontal phase of a computer source.
Sync Threshold: (progressive signals only) If a hardware device, such as a DVD
player, is not syncing properly with the projector, select this option to help it to sync
when connected to the projector.
Tracking: Adjusts the vertical scan of a computer source.
Color Space: This option applies to computer and component video sources. It
allows you to select a color space that has been specifically tuned for the input
signal. When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer sources
or choose either REC709 or REC601 for component video sources.
Noise Reduction: Reduces temporal and/or spatial noise in the image.
Flesh Tone Correction: Controls the amount of flesh tone correction applied to the
image.
Set Black Level...: Analyzes the current input image and calculates an offset value
which is then added to the analog to digital converter black level value. This
ensures optimum black level for each analog source.
Detect Film: Controls film mode detection, and determines whether the original
source of the input video was film or video.
Gamma: Select the appropriate gamma from among Video, Film, Bright, and CRT.
Color Gain Settings: Adjusts the gain of the red, green, or blue channel of the
image.
Color Offset Settings: Adjusts the offset of the red, green, or blue channel of the
image.
Horizontal/Vertical Position: Adjusts the position of a computer source.
Horizontal/Vertical Pincushion: Corrects optical pincushion distortion.
29
Advanced Picture menu